Every project starts with a site evaluation. Before quoting a paver walkway, driveway, or patio in Norman, we check soil composition, drainage patterns, slope, and signs of past problems such as sunken slabs, cracked concrete, or water pooling near the foundation. Norman’s expansive red clay swells after spring storms and shrinks during summer heat, so we measure grade and note where runoff concentrates before recommending a design. You then receive a written estimate that explains base depth, edge restraint, and paver selection in plain terms.
Excavation and base preparation come next, and this stage largely decides how long the finished surface performs. Crews dig to the planned depth, compact the subgrade with a plate compactor, and install crushed aggregate base in lifts, compacting each layer before adding the next to prevent future rutting and settling. Driveways get a deeper base than walkways. A screeded bedding sand layer is then set to grade with a slight pitch that moves water away from the home instead of toward it.
Installation and a final walkthrough complete the job. Pavers are laid in the chosen pattern, cut to fit along borders, locked in with edge restraints, and compacted before polymeric sand fills the joints to limit weed growth, ant activity, and washout. Then we walk the site together. That review covers early warning signs like shifting edges, joint loss, or low spots, along with the routine care that keeps Norman paver surfaces stable through 2026 and the seasons that follow.
